Ikelite Sony Alpha A6600 Housing

200DLM/E Underwater Housing for Sony Alpha a6600 Mirrorless Cameras

Overview

The Ikelite 200DLM/E Underwater Housing paired with the Sony Alpha a6600 offers a compact and travel-friendly solution for high-quality video capture whether you're scuba diving, freediving, surfing, or shooting in the pool. With a 24MP APS-C CMOS sensor and UHD 4K 30p video, the a6600 delivers reliable autofocus, impressive battery life, and lightweight portability.

Important Note

DLM Lens Port Required: A compatible DLM (Dry Lock Micro) lens port is required for waterproof operation and must be purchased separately. Refer to the appropriate port chart based on your lens selection.

Key Features

• Depth rating: 60 m
• Weight: 1.18 kg
• Dimensions: 18.4 × 14 × 15.2 cm
• Strobe connectivity: Ikelite bulkhead with manual hotshoe
• Control access: All camera functions except front dial
• Lens mount: DLM system
• Accessory port: 1/2-20 thread

Pre-Dive Checks

The transparent back and open-groove o-ring system provide visual assurance that your seal is complete before entering the water. For extra confidence, we recommend adding the optional Vacuum Kit with 1/2″ Valve (#47012) to test for leaks pre-dive.

Construction & Design

Constructed from a specially formulated ABS-PC blend, this housing is both lightweight and durable. Its light-coloured shell reduces heat build-up when shooting in warm environments. The ergonomic design and aluminium control components offer durability with intuitive usability.

Lens & Zoom Gear Support

Ikelite lens ports are engineered for strength and portability. A wide range of lenses is supported, and zoom/focus functionality can be controlled using optional gears (sold separately). Refer to the Ikelite port chart to select compatible ports and gears for your setup.

Wi-Fi Transfer

Use the Sony a6600's built-in Wi-Fi to transfer photos to a nearby device above water—no need to remove the camera from the housing. Ideal for reviewing shots quickly during surface intervals.

Camera Compatibility

This housing is designed exclusively for the Sony Alpha a6600. It is not compatible with add-on grips, battery grips, eyepieces, or LCD covers. Other camera models cannot be adapted for use with this housing.

In the Box

• Ikelite 200DLM/E Housing for Sony Alpha a6600
• Rear O-Ring #0110 (installed)
• Front O-Ring #0132.36 (installed)
• .050" Hex Key #0945.11
• Silicone Lubricant (1cc tube)