Ikelite 200DLM/B Underwater Housing Olympus OM-1 & OM-1 II

200DLM/B Underwater Housing for OM System OM-1 & OM-1 II

The 200DLM/B Underwater Housing is a purpose-built solution designed to enable the use of OM System OM-1 and OM-1 Mark II mirrorless Micro Four Thirds cameras in and around the water. It is suitable for scuba diving, snorkelling, surf photography, pool use, and a wide range of aquatic adventures.

Product Details

Pre-Dive Checks

The clear rear of the housing allows visual confirmation of the camera and O-ring seal before entering the water. The open-groove rear O-ring design suspends the seal in a natural position, making it easier to maintain and more reliable than traditional channel-based designs. Once closed, the O-ring can be clearly seen forming a secure, watertight seal.

For added peace of mind, the optional vacuum kit with 12.7 millimetre valve (#47012) is recommended. This allows a vacuum to be drawn on the housing to check for leaks prior to water entry.

Construction

The housing is constructed from a specially formulated ABS-PC blend, offering excellent durability while remaining significantly lighter than aluminium housings. The light-coloured exterior helps reduce heat build-up when shooting in warm, sunny conditions.

Lens Support

Ikelite lens ports are among the lightest available, while remaining robust enough to withstand demanding surf and dive conditions.

A wide range of lenses is supported. Most popular zoom lenses and selected focus rings can be operated using simple gearing systems that provide precise control at the fingertips. Zoom and focus gears vary depending on the lens in use.

Lens ports and zoom gears are sold separately. Refer to the appropriate port chart for compatibility details.

Wi-Fi Transfer

The camera’s built-in Wi-Fi function can be used to transfer images to another device without removing the camera from the housing. Wi-Fi functionality is available only above water and within close proximity to the connected device.

Compatibility

Unless otherwise specified, the housing does not support add-on grips, battery grips, eyepieces, LCD covers, or other camera accessories.

Differences in lens and control placement prevent other camera models from being used in or adapted to this housing. No alternative compatible camera models are currently known.

In the Box

• Underwater housing
• Rear O-Ring #0110 (installed)
• Front O-Ring #0132.36 (installed)
• 1.3 millimetre hex key (#0945.11)
• 1.6 millimetre hex key (#0945.16)
• 1 cc tube of silicone lubricant