Shop by
Category
Shop by
Camera Model
Shop by
Manufacturer

Ikelite 71307 PANASONIC G9 HOUSING 200DL

Add to Cart

$2628.00

Ikelite Underwater Housing for Panasonic Lumix DC-G9 Micro Four-Thirds Mirrorless Cameras

 

A full featured and durable waterproof housing from Ikelite for the Panasonic Lumix DC-G9 Micro Four-Thirds camera. Suitable for scuba, snorkel, surf, pool, and any application in or around the water.

This housing requires the addition of a compatible DL Lens Port for waterproof operation. Lens Port not included.

The Panasonic Lumix DC-G9 is built for speed. It boasts a large 20MP Four-Thirds CMOS sensor, fantastic in-body image stabilization, and an updated autofocus system. The metal body is weather-sealed with a bright articulating rear LCD display and large, high resolution electronic viewfinder. The DC-G9 supports high-speed UHS-II media, captures Ultra HD 4K video at up to 60p, and features a high-speed mode capable of up to 180 fps in Full HD.

Lens Ports

This housing features Ikelite’s robust new Dry Lock (DL) port system. "Dry Lock" refers to the placement of the O-ring on the outside of the port mount. This improves visibility and reduces the chances of water dropping onto your precious camera sensor. DL ports are the lightest on the market, yet robust and capable of standing up to rough surf. Attachment is quick and secure. A system of extensions can accommodate a huge variety of lenses with ease.

Most popular zoom lenses and select lens focus rings can be engaged using a simple yet effective gearing system that puts adjustment right at your fingertips. A large, soft-touch lobed knob on the side of the housing makes fine-tuned adjustments a breeze. Zoom and focus gears differ depending on which lenses you are using. All are lightweight and affordable. Zoom gears sold separately.

Vacuum System

The included Ikelite vacuum valve allows you to pressurize the housing to check for leaks prior to putting your expensive equipment in the water. Use of the vacuum valve requires a compatible Ikelite Vacuum Pump with Gauge # 47011, sold separately.

There is no greater assurance than being able to see your camera and O-ring seal through the back of the housing. Ikelite’s signature open-groove design suspends the rear O-ring in a natural position that is easier to maintain and more reliable than forcing the O-ring into a channel. Once the housing is closed you can see the O-ring form a solid, waterproof seal.

TTL Exposure

This housing supports your choice of shooting manual strobes or adding TTL electronics depending on your application.

You can enjoy the fastest and most accurate TTL exposure on the market by adding the Ikelite PT1K Panasonic TTL Kit with Hotshoe # 46031 and a compatible Ikelite DS strobe. Exposure compensation can be used added or subtracted in the camera.

The flash bulkhead has been moved to the top of the case for improved cord routing and reduced strain. Reliable locking connectors between the hotshoe and bulkhead make it easy to install the optional TTL electronics or carry back up parts when traveling to remote locations.

Controls and Set-Up

Shutter and AF/AE lock levers stand out with super sensitive and natural feeling curved levers.  Both controls can be extended using the optional Shutter Trigger Extension # 4077.93 for more comfortable use when using a right-hand quick release handle.

All push button controls are machined and hard anodized aluminium to reduce weight and resist salt build-up. The back of the housing is laser engraved with control symbols which will never fade or fall off.

The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.

Viewfinders

The included Ikelite Super-Eye Viewfinder provides an enhanced view of the camera's optical viewfinder when viewed through a dive mask. The viewfinder removes quickly and easily for the attachment of an optional Straight Magnified Viewfinder # 6890 or 45° Magnified Viewfinder (Type 1) # 6891.1. The angle of a 45º viewfinder is more ergonomic when shooting underwater plus it provides a larger and brighter view than the standard Super-Eye.

Handling & Travel

The housing, tray, and handles have been optimized to reduce weight while maintaining strength and durability. The Right-Hand Quick Release Handle # 4077.02 (sold separately) can be added or removed depending on your needs. The precision machined aluminium base features 1/4-20 tripod mounting sockets and additional mounting locations for future accessories. The base and handle can be quickly removed when breaking down your system for travel.

A 1/4-20 threaded mounting point is located front and centre on the housing above the lens port mount. This mount can be used to attach lightweight accessories like a focus light or GoPro camera.

If you're shooting with two strobe or lighting arms, then a top handle can be added to carry to and from the dive site. Top handles are available in a Cable Grip # 4080.07 or Aluminium Top Handle # 4080.08. The rigid aluminium version provides additional mounting points for lighting and accessories.

Construction

Ikelite’s new ABS-PC blend front is stronger than its clear counterpart, provides improved contrast and visibility, and keeps your camera running cooler in the sun.

Every housing is made in the USA, individually inspected for fit, and water pressure tested to 60m (200 feet).

Non-Ikelite Strobes

SEA&SEA, INON, and Retra strobes with an electrical connection can be triggered in manual exposure modes using an electrical sync cord. Strobes without an electrical sync cord connection cannot be attached to this system unless slaved off a hard-wired strobe.

Ikelite Non-Digital Strobes

Older non-digital strobes featuring an ICS-5 electrical sync cord bulkhead can be used with this system in manual exposure modes.

Fiber Optic

Fiber optic only strobes are not compatible with this installation. An external strobe must be connected by electrical sync cord.

Remote Triggering

Strobes with remote slave capabilities may be triggered off a flash attached to the housing by electrical sync cord. Ikelite DS strobes support remote triggering using the Optical Slave Converter # 4403 or the Water Wizard system (manufactured and sold by Aquatica).

Compatibility

This housing is only compatible with Panasonic Lumix DC-G9 camera as shipped by the manufacturer. Unless otherwise noted, this housing does not accommodate the use of add-on grips, battery grips, eyepieces, LCD covers, or other accessories.

Differences in lens and control placement prevent other DSLR models, including the newer D810, from being used in this housing. We are not aware of any other models which may be used in or adapted to this housing.

 

Specifications

  • 60m (200') depth rating
  • Compatible with Ikelite DL system lens ports
  • Controls are provided for all important camera controls;
  • Controls are not provided for Drive mode dial, Dioptre adjustment dial, Joystick, Front dial, F4 Function button, Preview button/F5 Function button, Function lever, V.MODE button
  • 1/4-20 thread base mounts with 3.5" spacing
  • Near neutral buoyancy in fresh water
  • Actual buoyancy varies depending on choice of lens and port
  • 2.2 kg (4.8 lb)
  • (226 x 185 x 165 mm) 8.9 x 7.3 x 6.5"
  • Vacuum valve included (pump sold separately)
  • Included Ikelite ICS-5 bulkhead connector with manual hotshoe for reliable electrical triggering of underwater strobes; Optional TTL accessories provides automatic exposure with compatible Ikelite DS strobes
  • ABS-PC construction is fundamentally corrosion-resistant
  • Made in the USA; Individually inspected for fit and water pressure tested to depth
  • 1 year limited warranty

 

What’s In the Box

  • Housing
  • Rear O-ring # 0132.59 (installed)
  • Front O-ring # 0132.45 (installed)
  • Base with Left-Hand Quick Release Handle # 4077.67
  • Port Hole Cover # 0200.92 (installed)
  • Waterproof Bulkhead Cap # 9104.5 (installed)
  • Zoom Gear Retainer # 75900 (installed)
  • Tool for Zoom Gear Retainer # 0945.06
  • 4-40 Hex Key # 0945.11
  • 1/16" Hex Key # 0945.16
  • 1/8" Hex Key # 0945.18
  • Silicone Lubricant 2cc Tube # 0184.2

 

Related products

Ikelite 0132.59 Video, DC582, SLR-DC O-ring

Ikelite 0132.59 Video, DC582, SLR-DC O-ring

$20.00

#0132.59 Ikelite Video, DC582, SLR-DC O-ring O-ring for either:- Cylindrical cover 7" I.D. video housing - Clear molded case with...

More Information Add to Cart

Ikelite 4060 DS160 strobe

Ikelite 4060 DS160 strobe

$1317.00

DS160 Strobe / NiMH   Product Details Extra-large flash capacitors and a dedicated rechargeable battery pack provide twice the...

More Information Add to Cart

Ikelite 4077.02 RIGHT QUICK RELEASE HANDLE + EXTENSION

Ikelite 4077.02 RIGHT QUICK RELEASE HANDLE + EXTENSION

$108.00

Ikelite Right-Hand Quick Release Handle with Extension Product Details The Ikelite Quick Release Handle allows for easy attachment and...

More Information Add to Cart

Ikelite 4077.93 SHUTTER TRIGGER EXTENSION

Ikelite 4077.93 SHUTTER TRIGGER EXTENSION

$25.00

Shutter Trigger Extension Product Details Extends the shutter lever away from the housing and closer to a right-hand handle. For use...

More Information Add to Cart

Ikelite 46031 PT1K PANASONIC TTL KIT

Ikelite 46031 PT1K PANASONIC TTL KIT

$618.00

PT1K Panasonic TTL Kit Product Details Internal TTL circuitry and hot shoe for use with certain Ikelite housings for Panasonic...

More Information Add to Cart

Ikelite 6891.1 (Type 1) 45-Degree Magnified Viewfinder

Ikelite 6891.1 (Type 1) 45-Degree Magnified Viewfinder

$1566.00

Ikelite #9891.2 (Type 1) 45° Magnified Viewfinder for DSLR and Mirrorless Housings   Two versions of this viewfinder are...

More Information Add to Cart

« Back to Ikelite
Enquire about this product »