SEA&SEA YS-02 Strobe Head
Add to Cart$379.00
Sea & Sea YS02 Strobe
Included Accessories:
Fixing bolt
Diffuser
*The Fiber-Optic Cable and the Strobe Mask Set may be required when using the SEA&SEA strobe with a waterproof case made by another company.
Relevant information:
Basic underwater strobe photography with the YS-01 and the YS-02
Features:
A manual strobe with exceptional cost performance.
Circular beam angle of 100°x100° and guide number of up to 20. The YS-02 is a new compact-type slave strobe that can be used for all applications from wide-angle to macro photography.
You can use the YS-02 as a manual slave strobe with the guide number control function, which can set the light level to any of ten levels. Accurate pictures that follow the photographer's intentions can be taken while the light level is adjusted with the guide number controller. The YS-02 is equipped with a pre-flash cancel mode (*1) that is compatible with a wide range of digital cameras with a pre-flash. Power comes from four AA batteries for a powerful and long-lasting strobe, so you can enjoy taking pictures all day long without having to recharge the batteries. The recycle time takes about two seconds with nickel-metal hydride batteries (2700 mAh) for stress-free continuous shooting.
You can fully exercise your creativity with the YS-02, which can be used as a primary strobe or secondary strobe in a wide range of applications, from compact digital cameras to digital SLR cameras.
*1 Some digital cameras adjust flash levels after a first flash and then capture an image with a second (main) flash. This first flash is called the pre-flash. The strobe’s pre-flash cancel function ignores the pre-flash and synchronizes the strobe with the main flash.
Specifications:
Guide Number (ISO 100/m) (land): 20
Beam Angle: 100°x 100° (with diffuser 110°x110°)
Batteries: 4xAA A: 6V Ni-MH: 4.8V
Number of Flashes*1: A: 230 Ni-MH: 330
Recycle time (full)*2: A: 2.5 sec. Ni-MH: 1.9 sec.
Colour temperature: 5600K
Colour temperature w/diffuser: 5250K
Depth rating: 75m / 250ft
Dimensions: Width 68mm x Height 108mm x Deoth 129mm / 2.7 x 4.3 x 5.2inch
Weight: 500g / 17.5oz
Underwater weight: -5g / -0.2oz
Others
- Exposure control: Light level control dial (GN): 1 / 1.4 / 2 / 2.8 / 4 / 5.6 / 8 / 11 / 16 / 20 (10 steps)
- Pre-flash control: Equipped with pre-flash cancel mode
- Slave function
- Auto power OFF function
- Accepts: Fiber-Optic Cable (L-type)
- Over-pressure relief valve
*1 Number of flashes and recycle time depends on the battery brand, temperature and frequency of use.
*2 Number of flashes and recycle time of Ni-MH batteries were tested on 2700mAh batteries.
Accessories:
Diffuser for YS-01/02 (standard accessory)
Fiber-Optic Cable (L-type)
Related products
Enecharger & Eneloop AA 4 Pack
$60.00
Enecharger Fast Charger with AC, DC & USB InputsIncludes 4x Eneloop Rechargeable Batteries The NC41500USB enecharger is a fully...
SEA&SEA YS02 Ball Arm Kit
$617.00
Sea & Sea YS02 Strobe with I-Dive Ball arm package Includes:Sea & Sea YS02 strobe with diffuserI-Dive Dual...
I-DIVE Tray Handle Rubber Grip
$49.00
Handle with rubber grip and 1" ball mount Compatible with I-Dive base
An Essential Guide to Digital Underwater Photography 2nd Edition
$26.00
An Essential Guide to Digital Underwater Photography2nd Edition By Michael AW with Mathieu Meur 127 PAGES, Full colour Book Synopsis:...
« Back to SeaandSea
Enquire about this product »



